|

   
Home
   

>

   
Marine
   

>

   
Wireteknik Roll Swaging Machines, Pumps & Dies
   

>

   
A100 Roll Swaging Machine 1.6-5mm Wire

 

Wireteknik A100 Roll Swaging Machine 1.6-5mm Wire

Wireteknik A100 Roll Swaging Machine 1.6-5mm Wire

A perfect machine for swaging on-site, its low weight and small outer dimensions makes it extremely portable.

Typical applications:
·  Architectural, like balustrades and railing.
·  Scenographic use at theaters for hanging and supporting set pieces.
·  Shop fitters use it to make spectacular product displays for their customers.
·  Standing rigging for sailing dinghies and lifelines on yachts.

Features:
·  Fully approved by Lloyds Register of Shipping.
·  Includes hydraulic hand pump.
·  Includes full sets of pullers.
·  Dies sold separately.

Part Description Swaging Range
Wire Ø mm
Length
mm
Width
mm
Height
mm
Weight
Kg.
WT-A100 A100 Swaging machine c/w hand pump 1.6 - 5 440 300 135 11
WT-A100-02 A100 Dies - 2.0/2.5mm (Pair) 2.0 - 2.5 - - - -
WT-A100-03 A100 Dies - 3mm (Pair) 3 - - - -
WT-A100-04 A100 Dies - 4mm (Pair) 4 - - - -
WT-A100-05 A100 Dies - 5mm (Pair) 5 - - - -
Operating instructions & wire swaging dimensions



Operating Instructions
  ·  Use a pair of roller dies to fit the cable diameter

  ·  Slip the dies onto the cogwheel synchronizing pins

  ·  The arrows on the dies point in the direction of swaging









  ·  Attach the terminal to the attachment fixture on the drawbar

  ·  Adjust the length so the roller dies meet the terminal shank at the desired position











  ·  Apply enough hydraulic pressure so the roller dies holds the terminal firmly

  ·  Mark and insert the cable into the terminal throat











  ·  Move the transparent protective shield into position

  ·  Apply hydraulic pressure to draw the terminal between the roller dies











  ·  As the roller dies rotate, they will press the terminal shank onto the wire rope













  ·  Measure the diameter of the terminal after swaging, compare with the wire swaging dimensions list













Note: The swager is designed to reduce the terminal shank to required diameter in one pass. However dimension variations of terminals, cables or material hardness could make it necessary to pass the terminal twice.

When swaging solid rods,  a special swaging compound must be used. After swaging wipe off the roller dies and swaging machine, apply a corrosion preventative.

The machines are designed to swage full steel wire rope or rod only.

Wire Swaging Dimensions

Wire
Size mm
Diameter Before
Swaging mm
Diameter After
Swaging mm
1.63.94 - 4.063.40 - 3.50
2.55.41 - 5.534.70 - 4.82
36.22 - 6.355.44 - 5.56
47.42 - 7.546.23 - 6.35
59.00 - 9.127.83 - 7.95
5.510.72 - 10.849.35 - 9.50
612.42 - 12.5410.95 - 11.12
714.18 - 14.3012.50 - 12.70
816.01 - 16.1314.07 - 14.30
9-1017.73 - 17.8515.70 - 15.90
1119.63 - 19.8317.27 - 17.47
1221.32 - 21.4418.82 - 19.05
12E20.00 - 20.0817.60 - 17.80
1424.88 - 25.0022.00 - 22.23
1628.05 - 28.1725.15 - 25.40
1934.40 - 34.5231.44 - 31.75
2240.21 - 40.4636.20 - 36.50
2545.77 - 46.0241.28 - 40.97
2850.0044.00 - 44.50
3258.0051.00 - 51.50
3665.0057.00 - 57.80
38 - 4072.0063.20 - 64.00


Related Products

 

 

 

 

 

    contact us

ISO 9001 logo ProBoat Ltd
Burnham Business Park,
Burnham - on - Crouch,
Essex,
CM0 8TE, UK


Phone - +44 (0)1621-785455
E mail - info@proboat.co.uk

 

    info

Our communications keep you informed about our new products, offers and events.
Click here and we will include you in our e-mailings, we do not divulge your address to third parties.

Disclaimer
Although great care is taken to ensure the information in this website is accurate, all information is given for guidance only and is not contractual.
We reserve the right to alter specifications without notice. The purchaser is responsible for choosing the correct product for it's particular application.
All goods are supplied according to our conditions of sale which are available on request at any time.