Wireteknik A400 Roll Swaging Machine 8-28mm Wire

A400 Roll swaging machine for 8 to 28mm wire.

Typical applications:

Standing rigging and lifelines for larger sailboats and yachts.
Architectural, like balustrades,railing and hanging bridges.
Often used to build support structures for membrane roofs and tents.
Structural rigging for sail-roofs and sail-shades.

Features:

Fully approved by Lloyd's Register of Shipping.
Include full sets of pullers.
Dies and pumps sold separately.

more info ↓ spec sheet Swaging Tools Wireteknik

Part	Description	Swaging Range Wire Ø mm	Length mm	Width mm	Height mm	Weight Kg.	RRP Inc VAT	Unit
WT-A400	A400 Swaging machine	8 - 28	990	530	370	150	POA	EACH
WT-A400-08	A400 Dies - 8mm (Pair)	8	-	-	-	-	POA	PAIR
WT-A400-10	A400 Dies - 10mm (Pair)	10	-	-	-	-	POA	PAIR
WT-A400-12	A400 Dies - 12mm (21.4) (Pair)	12 (21.4)	-	-	-	-	POA	PAIR
WT-A400-12E	A400 Dies - 12mm EU(20.0) (Pair)	12 EU(20.0)	-	-	-	-	POA	PAIR
WT-A400-14	A400 Dies - 14mm (Pair)	14	-	-	-	-	POA	PAIR
WT-A400-16	A400 Dies - 16mm (Pair)	16	-	-	-	-	POA	PAIR
WT-A400-19	A400 Dies - 19mm (Pair)	19	-	-	-	-	POA	PAIR
WT-A400-22	A400 Dies - 22mm (Pair)	22	-	-	-	-	POA	PAIR
WT-A400-25	A400 Dies - 25/26mm (Pair)	25/26	-	-	-	-	POA	PAIR
WT-A400-28	A400 Dies - 28mm (Pair)	28	-	-	-	-	POA	PAIR

Wireteknik A400 operating instructions

Operating Instructions

· Use a pair of roller dies to fit the cable diameter

· Slip the dies onto the cogwheel synchronizing pins

· The arrows on the dies point in the direction of swaging

· Attach the terminal to the attachment fixture on the drawbar

· Adjust the length so the roller dies meet the terminal shank at the desired position

· Apply enough hydraulic pressure so the roller dies holds the terminal firmly

· Mark and insert the cable into the terminal throat

· Move the transparent protective shield into position

· Apply hydraulic pressure to draw the terminal between the roller dies

· As the roller dies rotate, they will press the terminal shank onto the wire rope

· Measure the diameter of the terminal after swaging, compare with the wire swaging dimensions list

Note: The swager is designed to reduce the terminal shank to required diameter in one pass. However dimension variations of terminals, cables or material hardness could make it necessary to pass the terminal twice.

When swaging solid rods, a special swaging compound must be used. After swaging wipe off the roller dies and swaging machine, apply a corrosion preventative.

The machines are designed to swage full steel wire rope or rod only.

Wire Swaging Dimensions

Wire Size mm	Diameter Before Swaging mm	Diameter After Swaging mm
1.6	3.94 - 4.06	3.40 - 3.50
2.5	5.41 - 5.53	4.70 - 4.82
3	6.22 - 6.35	5.44 - 5.56
4	7.42 - 7.54	6.23 - 6.35
5	9.00 - 9.12	7.83 - 7.95
5.5	10.72 - 10.84	9.35 - 9.50
6	12.42 - 12.54	10.95 - 11.12
7	14.18 - 14.30	12.50 - 12.70
8	16.01 - 16.13	14.07 - 14.30
9-10	17.73 - 17.85	15.70 - 15.90
11	19.63 - 19.83	17.27 - 17.47
12	21.32 - 21.44	18.82 - 19.05
12E	20.00 - 20.08	17.60 - 17.80
14	24.88 - 25.00	22.00 - 22.23
16	28.05 - 28.17	25.15 - 25.40
19	34.40 - 34.52	31.44 - 31.75
22	40.21 - 40.46	36.20 - 36.50
25	45.77 - 46.02	41.28 - 40.97
28	50.00	44.00 - 44.50
32	58.00	51.00 - 51.50
36	65.00	57.00 - 57.80
38 - 40	72.00	63.20 - 64.00

Related Products

Electro Hydraulic Power Unit

marine

architectural

safety at height

stockist

brands

trade

|

Home

>

Marine

>

Wireteknik Roll Swaging Machines, Pumps & Dies

>

A400 Roll Swaging Machine 8-28mm Wire

Wireteknik A400 Roll Swaging Machine 8-28mm Wire

Related Products

contact us

info

disclaimer