Wireteknik A270 Roll Swaging Machine 2.5-12mm Wire

A270 Roll swaging machine for 2.5 to 12mm wire.

Typical applications:

Standing rigging and lifelines for sailboats.
Architectural, like balustrades and railing.
Structural rigging for sail-roofs and sail-shades

Features:

Fully approved by Lloyds Register of Shipping.
Machines include full sets of pullers.
Dies and pumps sold separately.

more info ↓ spec sheet Swaging Tools Wireteknik

Part	Description	Swaging Range Wire Ø mm	Length mm	Width mm	Height mm	Weight Kg.	RRP Inc VAT	Unit
WT-A270	A270 Swaging machine	2.5 - 12	750	420	177	51	POA	EACH
WT-A270-02	A270/A250 Dies - 2.0/2.5mm (Pair)	2.0 - 2.5	-	-	-	-	POA	PAIR
WT-A270-03	A270/A250 Dies - 3mm (Pair)	3	-	-	-	-	POA	PAIR
WT-A270-04	A270/A250 Dies - 4mm (Pair)	4	-	-	-	-	POA	PAIR
WT-A270-05	A270/A250 Dies - 5mm (Pair)	5	-	-	-	-	POA	PAIR
WT-A270-06	A270/A250 Dies - 6mm (Pair)	6	-	-	-	-	POA	PAIR
WT-A270-07	A270/A250 Dies - 7mm (Pair)	7	-	-	-	-	POA	PAIR
WT-A270-08	A270-A250 Dies - 8mm (Pair)	8	-	-	-	-	POA	PAIR
WT-A270-10	A270/A250 Dies - 10mm (Pair)	10	-	-	-	-	POA	PAIR
WT-A270-12	A270/A250 Dies - 12mm (Pair) (21.4)	12 (21.4)	-	-	-	-	POA	PAIR
WT-A270-12E	A270/A250 Dies - 12mm EU(20.0) (Pair)	12 EU(20.0)	-	-	-	-	POA	PAIR

Wireteknik brochure c/w operating instructions & wire swaging dimensions

Operating Instructions

· Use a pair of roller dies to fit the cable diameter

· Slip the dies onto the cogwheel synchronizing pins

· The arrows on the dies point in the direction of swaging

· Attach the terminal to the attachment fixture on the drawbar

· Adjust the length so the roller dies meet the terminal shank at the desired position

· Apply enough hydraulic pressure so the roller dies holds the terminal firmly

· Mark and insert the cable into the terminal throat

· Move the transparent protective shield into position

· Apply hydraulic pressure to draw the terminal between the roller dies

· As the roller dies rotate, they will press the terminal shank onto the wire rope

· Measure the diameter of the terminal after swaging, compare with the wire swaging dimensions list

Note: The swager is designed to reduce the terminal shank to required diameter in one pass. However dimension variations of terminals, cables or material hardness could make it necessary to pass the terminal twice.

When swaging solid rods, a special swaging compound must be used. After swaging wipe off the roller dies and swaging machine, apply a corrosion preventative.

The machines are designed to swage full steel wire rope or rod only.

Wire Swaging Dimensions

Wire Size mm	Diameter Before Swaging mm	Diameter After Swaging mm
1.6	3.94 - 4.06	3.40 - 3.50
2.5	5.41 - 5.53	4.70 - 4.82
3	6.22 - 6.35	5.44 - 5.56
4	7.42 - 7.54	6.23 - 6.35
5	9.00 - 9.12	7.83 - 7.95
5.5	10.72 - 10.84	9.35 - 9.50
6	12.42 - 12.54	10.95 - 11.12
7	14.18 - 14.30	12.50 - 12.70
8	16.01 - 16.13	14.07 - 14.30
9-10	17.73 - 17.85	15.70 - 15.90
11	19.63 - 19.83	17.27 - 17.47
12	21.32 - 21.44	18.82 - 19.05
12E	20.00 - 20.08	17.60 - 17.80
14	24.88 - 25.00	22.00 - 22.23
16	28.05 - 28.17	25.15 - 25.40
19	34.40 - 34.52	31.44 - 31.75
22	40.21 - 40.46	36.20 - 36.50
25	45.77 - 46.02	41.28 - 40.97
28	50.00	44.00 - 44.50
32	58.00	51.00 - 51.50
36	65.00	57.00 - 57.80
38 - 40	72.00	63.20 - 64.00