,

|

   
Home
   

>

   
Marine
    

>

   
Swageless Wire Terminals
   

>

   
Stainless Steel Swageless Cone Toggle

 

Blue Wave Stainless Steel Swageless Cone Toggle

 

Swageless cone toggle terminal - Secure, reliable and corrosion resistant swageless end fitting, can be installed quickly and easily at sea - no special tools required!

Available to suite 1 x 19 Stainless Steel wire or Stainless Steel Dyform/Compacted wire.

Highly polished stainless steel (AISI 316).

 

Part Wire Type Wire Ø
mm		 Pin Ø
mm		 A
mm		 B
mm		 C
mm		 KW
mm		 L1
mm		 L2
mm		 Break
Load Kg.		 RRP
Inc VAT		 Unit
BW-SC830804 1x19 Wire 4 8 10 20 9 12 85 27 2200 £54.84 EACH
BW-SC830804-C 1x7 Dyform/Compact 4 8 10 20 9 12 85 27 2200 £54.84 EACH
BW-SC831005 1x19 Wire 5 9.5 12 26 12 14 102 30 2800 £61.49 EACH
BW-SC831005-C 1x19 Dyform/Compact 5 9.5 12 26 12 14 102 30 2800 £61.49 EACH
BW-SC831306 1x19 Wire 6 12.7 18 36 18 17 132 38 5000 £75.81 EACH
BW-SC831306-C 1x19 Dyform/Compact 6 12.7 18 36 18 17 132 38 5000 £75.81 EACH
BW-SC831307 1x19 Wire 7 12.7 18 35 18 19 145 46 6000 £83.67 EACH
BW-SC831307-C 1x19 Dyform/Compact 7 12.7 18 35 18 19 145 46 6000 £83.67 EACH
BW-SC831308 1x19 Wire 8 12.7 18 35 18 22 158 54 6200 £102.81 EACH
BW-SC831608 1x19 Wire 8 16 20 41 20 22 173 54 8000 £112.47 EACH
BW-SC831608-C 1x19 Dyform/Compact 8 16 20 41 20 22 173 54 8000 £112.47 EACH
BW-SC831910 1x19 Wire 10 19 24 45 25 27 202 64 11000 £181.89 EACH
BW-SC831910-C 1x19 Dyform/Compact 10 19 24 45 25 27 202 64 11000 £181.89 EACH
BW-SC831912 1x19 Wire 12 19 24 45 25 33 226 82 17000 £251.78 EACH
BW-SC831912-C 1x19 Dyform/Compact 12 19 24 45 25 33 226 82 17000 £251.78 EACH
BW-SC832214 1x19 Wire 14 22 26 48 30 37 247 89 23000 £451.88 EACH
BW-SC832214-C 1x36 Compact 14 22 26 48 30 37 247 89 23000 £451.88 EACH
BW-SC832214-D 1x19 Dyform 14 22 26 48 30 37 247 89 23000 £451.88 EACH
BW-SC832516 1x19 Wire 16 25.4 29 61 37 42 285 100 28000 £592.84 EACH
BW-SC832516-C 1x36 Compact 16 25.4 29 61 37 42 285 100 28000 £592.84 EACH
BW-SC832516-D 1x19 Dyform 16 25.4 29 61 37 42 285 100 28000 £592.84 EACH
BW-SC832819 1x19 Wire 19 28 34 65 34 44 319 115 30000 £1,164.26 EACH
BW-SC833522 1x19 Wire 22 34.8 44 83 41 50 377 125 38000 £1,507.71 EACH
BW-SC833526 1x19 Wire 26 34.8 44 83 41 66 403 150 48000 £1,993.42 EACH
 Swageless Cone Fitting Instructions

Swageless Cone Terminal Assembly



Apply Loctite 262 on threads, and screw the two parts together. Separate the two parts again, to ensure that the threads are filled with Loctite.


Slide the Cone housing over the wire

Open the outer strands one by one. A screwdriver is helpful for this job.


Place the Cone over the center core of the wire, rotating the cone while pushing.


Twist the outer strands back over the cone. Make sure that all strands are evenly distributed over the cone. The end of the wire must be 1½ x the wire diameter over the top of the cone. Check the distance with the calipers.

Fill the wire former hole with Blue Wave lubricant
The terminal is now ready to be assembled.
Using appropriate tools, screw the two parts together tightly. To ensure total security apply one last half turn. However, do not overtighten threads with excessive force.

As a precaution take the terminal apart and visually check that the strands lay evenly around the cone and fit into the wire former (top part). Finally re-assemble as above and allow the Locitite to dry.


The SCT-terminal is designed for use on 1x19 wire construction as well as compacted and Dyform wires. The user is responsible for proper use and installation of the components. Blue Wave does not take responsibility for damaged threads, due to over-tightening or lack of Loctite. Blue Wave does not recommend to seal the terminal, but advise to rinse the terminal regularly with fresh water and treat with WD40.
 

Related Products

Lubricant and Thread Loctite Kit
Lubricant and Thread Loctite Kit
Spare Swageless Cone
Spare Swageless Cone

 

 

 

 

 

contact us
ProBoat Ltd
Burnham Business Park,
Burnham - on - Crouch,
Essex,
CM0 8TE, UK

Phone - +44 (0)1621-785455
E mail - info@proboat.co.uk

 

info

Terms and conditions
Downloads
Stockists
Products
Trade account
Copyright © 2018 Proboat Ltd.
All rights reserved.

 

disclaimer

Although great care is taken to ensure the information in this website is accurate, all information is given for guidance only and is not contractual.
We reserve the right to alter specifications without notice. The purchaser is responsible for choosing the correct product for it's particular application.
All goods are supplied according to our conditions of sale.