Blue Wave Stainless Steel Swageless Cone Fork

Swageless cone fork terminal - Secure, reliable and corrosion resistant swageless end fitting, can be installed quickly and easily at sea - no special tools required!

Available to suite 1 x 19 Stainless Steel wire or Stainless Steel Dyform/Compacted wire.

Highly polished stainless steel (AISI 316).

more info ↓ spec sheet Wire Terminal Swageless Blue Wave

Part	Wire Type	Wire Dia mm	Pin Ø mm	A mm	B mm	C mm	KW mm	L1 mm	L2 mm	Break Load Kg.	RRP Inc VAT	Unit
BW-SC840804	1x19 Wire	4	8	6.5	16	9	12	62	27	2200	£45.32	EACH
BW-SC840804-C	1x7 Dyform/Compact	4	8	6.5	16	9	12	62	27	2200	£45.32	EACH
BW-SC841005	1x19 Wire	5	9.5	9	21	11	14	73	30	2800	£51.74	EACH
BW-SC841005-C	1x19 Dyform/Compact	5	9.5	9	21	11	14	73	30	2800	£51.74	EACH
BW-SC841306	1x19 Wire	6	12.7	11	26	13.5	17	90	38	4400	£71.03	EACH
BW-SC841306-C	1x19 Dyform/Compact	6	12.7	11	26	13.5	17	90	38	4400	£71.03	EACH
BW-SC841307	1x19 Wire	7	12.7	11	29	14.5	19	104	46	6000	£94.78	EACH
BW-SC841307-C	1x19 Dyform/Compact	7	12.7	11	29	14.5	19	104	46	6000	£94.78	EACH
BW-SC841308	1x19 Wire	8	12.7	11	30	13.5	22	112	54	6000	£104.06	EACH
BW-SC841608	1x19 Wire	8	16	14	32	17	22	120	54	8000	£113.34	EACH
BW-SC841608-C	1x19 Dyform/Compact	8	16	14	32	17	22	120	54	8000	£113.34	EACH
BW-SC841910	1x19 Wire	10	19	18	35	21	27	142	64	11000	£141.22	EACH
BW-SC841910-C	1x19 Dyform/Compact	10	19	18	35	21	27	142	64	11000	£141.22	EACH
BW-SC841912	1x19 Wire	12	19	18	39	21	33	162	82	17000	£276.29	EACH
BW-SC841912-C	1x19 Dyform/Compact	12	19	18	39	21	33	162	82	17000	£276.29	EACH
BW-SC842214	1x19 Wire	14	22	20	45	25	37	187	89	23000	£436.55	EACH
BW-SC842214-C	1x36 Compact	14	22	20	45	25	37	187	89	23000	£436.55	EACH
BW-SC842214-D	1x19 Dyform	14	22	20	45	25	37	187	89	23000	£436.55	EACH
BW-SC842516	1x19 Wire	16	25.4	22	47	26.5	42	200	100	28000	£558.76	EACH
BW-SC842516-C	1x36 Compact	16	25.4	22	47	26.5	42	200	100	28000	£558.76	EACH
BW-SC842516-D	1x19 Dyform	16	25.4	22	47	26.5	42	200	100	28000	£558.76	EACH
BW-SC842819	1x19 Wire	19	28	27	59	32.5	44	236	115	30000	£1,057.28	EACH
BW-SC843522	1x19 Wire	22	34.8	32	72	40	50	275	125	38000	£1,249.19	EACH
BW-SC843526	1x19 Wire	26	34.8	32	72	40	66	292	150	48000	£1,497.28	EACH

Swageless Cone Fitting Instructions

Swageless Cone Terminal Assembly

Apply Loctite 262 on threads, and screw the two parts together. Separate the two parts again, to ensure that the threads are filled with Loctite.

Slide the Cone housing over the wire

Open the outer strands one by one. A screwdriver is helpful for this job.

Place the Cone over the center core of the wire, rotating the cone while pushing.

Twist the outer strands back over the cone. Make sure that all strands are evenly distributed over the cone. The end of the wire must be 1½ x the wire diameter over the top of the cone. Check the distance with the calipers.

Fill the wire former hole with Blue Wave lubricant

The terminal is now ready to be assembled.

Using appropriate tools, screw the two parts together tightly. To ensure total security apply one last half turn. However, do not overtighten threads with excessive force.

As a precaution take the terminal apart and visually check that the strands lay evenly around the cone and fit into the wire former (top part). Finally re-assemble as above and allow the Locitite to dry.

The SCT-terminal is designed for use on 1x19 wire construction as well as compacted and Dyform wires. The user is responsible for proper use and installation of the components. Blue Wave does not take responsibility for damaged threads, due to over-tightening or lack of Loctite. Blue Wave does not recommend to seal the terminal, but advise to rinse the terminal regularly with fresh water and treat with WD40.

Related Products

Lubricant and Thread Loctite Kit

Spare Swageless Cone

marine

architectural

safety at height

stockist

brands

trade

|

Home

>

Marine

>

Swageless Wire Terminals

>

Stainless Steel Swageless Cone Fork

Blue Wave Stainless Steel Swageless Cone Fork

Related Products

contact us

info

disclaimer