Profurl Above Deck Racing Headsail Furler 6-19M

Profurl above deck racing headsail furlers for boat from 6 to 19 metres.

10 year world wide warranty.

For Racing Models R250 & R480
Black anodised aerofoil profile
Several fittings: adjustment plates, long link plates, turnbuckle cylinder, below the decking fitting, stainless steel locking devices
Options: stainless steel locking devices, turnbuckle cylinder
Extrusion length is 2 meters
Short link plates as standard

Please specify stay pin diameter when ordering

more info ↓ spec sheet Furler Profurl

Part	System Length M	Boat Length M	Max Wire Stay Ø mm	Max Rod Stay Ø # rod	Stay Pin Ø mm	Luff Line Ø mm	Weight /Meter kg	RRP Inc VAT	Unit
PF-R25008	8	6 - 9	6.35	#10	8-10-12-14-16	5	0.383	£1751.00	each
PF-R25010	10	6 - 9	6.35	#10	8-10-12-14-16	5	0.383	£1937.00	each
PF-R25012	12	6 - 9	6.35	#10	8-10-12-14-16	5	0.383	£2122.00	each
PF-R48018	18	14 - 19	12.7	#40	16-18-19-22-25-28	6	1.200	£7725.00	each
PF-R48020	18	14 - 19	12.7	#40	16-18-19-22-25-28	6	1.200	£8107.00	each
PF-R48022	22	14 - 19	12.7	#40	16-18-19-22-25-28	6	1.200	£8489.00	each

Installation Guide R250, R350, R420, R430

Installation Guide R480

Spares Guide R250, R350, R420, R430

Spares guide R480

What kind of fitting for my furling system?

Profurl furling systems can be adapted to your boat's configuration, not vice versa. Profurl offers a wide range of fittings, a description of each fitting is listed below:-

Standard Fitting with Short Link Plates

· Raise the drum mechanism in order to clear the deck in case of obstacles (bow roller etc).

· Fitting with adjustment plates is also possible

· Standard locking device and threaded pin for a stay eye fitting

Fitting Close to the Deck with Stainless Steel Lockers

· To increase the luff length

· Stainless steel locking device and a smooth pin

Fitting with Long Link Plates

· The drum can be lifted to avoid interference with the anchor and to reduce the sail chafe on the lifelines

· The forestay length is still adjustable

· Standard locking device

Fitting with a Turnbuckle Cylinder

· The rigging screw is in the turnbuckle cylinder

· The furling line can be fitted lower to the deck

· It is also possible to use a combination of a turnbuckle cylinder and long link plates

Below the Deck Fitting

· An aesthetic solution chosen by some boat builders (Bénéteau, X-yacht).

· Adjustable tack fitting

Locking Devices

· Standard ones for Cruising and Racing models with short link plates (as shown in the picture)

· The locking devices are available for standard, medium and long link plates attachment configurations.

· Stainless steel locking devices with insulated bushes (recommended for boats with high/intensive use).

Also mandatory in case of close to deck fitting

*the locking device for C420, C520, C530 and R480 models is a drum mechanism, made from two counter plastic halves, and including retaining screws, to withstand lateral loads.